ASTM 201 304 2205 310s Stainless Steel tube 317h Stainless Seamless Pipe ASME B36.19m 2 Inch 6 Inch Stainless Steel Pipe

ASTM 201 304 2205 310s stainless Steel Pipe 317h Stainless Seamless Pipe ASME B36.19m 2 Inch 4 Inch 6 Inch Stainless Steel 316L Ss Steel Pipe

Scope & Material & Tolerance

ASME B36.19M is the standard specification for both welded and seamless stainless steel pipes. These stainless steel pipes may be used for high or low temperatures and pressures. This dimensional standard not only can be applied to wrought stainless steel pipes but can also be extensively applied to non-ferrous alloy pipes such as titanium, zirconium, copper and aluminum. Pipes conforming to ASME B36.19M dimensions shall be manufactured in accordance with relative ASTM and ASME material specification. The variations in dimensions or dimensional tolerances differ depending upon the method of manufacture employed in making the pipe to various specifications available. Permissible variations or tolerances are indicated in each specification.

Size & End Preparation

ASME B36.19M covers dimensions of pipes sized from NPS 1/8 (DN 6) to NPS 30 (DN 750). Sizes larger than 30″ are also commercially available in accordance with ASME B36.10M. Pipes NPS 12 (DN 300) and smaller have outside diameters numerically larger than their corresponding nominal sizes. Pipes NPS 14 (DN 350) and larger have outside diameter numerically equal to the corresponding nominal sizes. Pipes conforming to ASME B36.19M may be furnished with plain ends (PE), butt welding ends (BW), threaded ends, and grooved ends.

Wall Thicknesses & Weights

ASME B36.10M is the standard covers the standardization of dimensions of welded and seamless steel pipe for high or low temperatures and pressures. However, the pipe material can be extended to nickel & nickel alloy, titanium & titanium alloy, zirconium & zirconium alloy, aluminum & aluminum alloy, copper & copper alloy, etc. ASME B36.10 covers sizes from NPS 1/8 (DN 6) through NPS 80 (DN 2000). There are several wall-thickness designations available: SCH 5, SCH 10, SCH 20, SCH 30, STD, SCH 40, SCH 60, XS, SCH 80, SCH 100, SCH 120, SCH 140, XXS, SCH 160. The weight calculation formulas are the same as that of ASME B36.19M.

The nominal weights (masses) of stainless steel pipe can be calculated using the following two formulas (if the formulas are applied to non-ferrous materials other than steel such as titanium, zirconium, or copper alloy, distinctive rectification factor shall be multiplied for each):

• Wt = 10.69 ( D - t ) t; Wt: weight of pipe in lb/ft; D: outside diameter of pipe in inch; t: wall thickness in inch.
• Wt' = 0.0246615 ( D - t ) t; Wt': weight of pipe in kg/m; D: outside diameter of pipe in mm; t: wall thickness in mm.

ASME B36.10M welded stainless steel pipe NPS 1 SCH XXS ASTM B167 UNS N06690 stainless steel pipe
Chemical Ingredient

​ASME B36.19M Stainless Steel tube NPS(DN) Nominal size

​

​

*Dimensions and weights for 8″ to 30″ pipe, in both US Customary and SI metric units.

FAQ
Q1. ARE YOU FACTORY OR TRADER?

A1. Our company is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.


Q2. WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?

A2. Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.


Q3. HOW TO GET A SAMPLE?

A3. FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.


Q4. HOW TO VISIT YOUR FACTORY?

A4. Most of the main cities have flights to Wuxi; you can take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day 1 flight around noon time).